Built 5S-FE

**Pineapple** · 10-29-2006, 07:05 PM

This was supposed to go into my Celica. Since the car was wrecked, don't need this anymore.
$3000 take it with all other engine parts I have from 2 5S-FE. Include extra fuel rails, injectors, throttle bodies, power steering pumps, cut engine bay wiring harness. 2 distrubutors, external coil version. 3 Intake manifolds. 3S-FE head. Many other part. Take them all or take whatever you need.

Engine will work in any S-series equiped cars which meas Camry, Celica and MR-2.

Engine is cleaned and painted high heat silver. Head port and polish and resurfaced with valve job. New Wiseco flat top piston with rings and install on rod already. Piston will give more then 11.5:1 compression ratio. New seals from Toyota. All crank bearing surface are regrind to same size. New Topline bearings included. Block already honed. Valves are installed. Just need to put shim buckets in and check clearance. Extra shims in the 3S-FE head. Stock cam shafts.

Also has 3S-GTE highflow oil pump. 4-1 header. A few sensors on coolant neck.

**MartinGouda** · 10-29-2006, 07:16 PM

but we've been waiting sooooo long....

**Pineapple** · 10-29-2006, 07:42 PM

I won't be about to start the project again until 3-4 years later. Its better to sell it and get my money. Too many thing can change in 3 years. I'll keep it if I don't get good offer.

I don't want to like it go any more then you. Last couple weeks was rough. Can't stop thinking what I should do.

**tankd0g** · 10-29-2006, 10:52 PM

Was this built to take a turbo or something?

**hedgehog** · 10-29-2006, 11:13 PM

id say no , 11.5:1 cr na motor , but you could replace the pistons... but this isnt my listing so ill stfu

nice stuff though ;)

**lpugfan2004** · 10-29-2006, 11:19 PM

no he built it to be high hp N/A 5SFE which would be the first right?

**Pineapple** · 10-30-2006, 01:05 AM

You can add turbo but low boost only.
Not the first. People do that with MR-2 already. This should be one of the top HP NA 5S-FE. Get the Webcam regrind cams and it will be the top. So far people had done high compression or cam, not both.
BTW Im not parting anything out. It'll be sold as a whole. I want to see how much HP this engine can do.

I'll add Toyota factory repair manual for 90 Celica also.

**lpugfan2004** · 10-30-2006, 03:08 AM

would have been awesome to see you finish it and seen a dyno video to see those numbers

**tankd0g** · 10-30-2006, 11:19 AM

I see, I was just wondering why so much money over a GTE, but that would be sweet to have if you could get it all working and tuned.

**CiRiS91GT** · 10-30-2006, 04:53 PM

If we can talk price a little bit, I'd be willing to give it a good home.

I have a 5s on the floor right now, and this is basically what I was going to build it to, as I no longer want a boosted motor... pm me.

**DarkSideCelica** · 10-30-2006, 08:51 PM

too bad u're in toronto... shipping would cost a lot i figured... i would take if u could lower the price a lil... i'm looking to to the 3sgte swap, but if this works out, then y not

**DarkSideCelica** · 10-30-2006, 09:04 PM

btw, how much power is it supposed to make? 220 ish?

**Pineapple** · 10-31-2006, 01:39 AM

Probably around 180-200. Maybe more with regrind cams.

**CiRiS91GT** · 10-31-2006, 01:56 PM

i wouldnt put it in without finishing it off ;)

go big or dont even bother... isnt that how it goes??? :)

**Pineapple** · 10-31-2006, 02:32 PM

Yea, I planned to throw in the cams later due to money.
With the cams, it should be the highest HP NA 5S-FE in North America. All the MR-2 guys will think you're God.

Man I miss how the 5S sound.

**3sgekid** · 12-04-2006, 09:13 PM

were you get those headers havin prblems finding them

**Locker** · 12-05-2006, 12:13 AM

Quote:

Originally Posted by 3sgekid

were you get those headers havin prblems finding them

i want to see some pic's of your 3sge

10-29-2006, 07:05 PM	#1 (permalink)
Pineapple Location: Toronto Posts: 4,282 Join Date: Jan 2004 Last On: Yesterday 01:05 AM	Built 5S-FE This was supposed to go into my Celica. Since the car was wrecked, don't need this anymore. $3000 take it with all other engine parts I have from 2 5S-FE. Include extra fuel rails, injectors, throttle bodies, power steering pumps, cut engine bay wiring harness. 2 distrubutors, external coil version. 3 Intake manifolds. 3S-FE head. Many other part. Take them all or take whatever you need. Engine will work in any S-series equiped cars which meas Camry, Celica and MR-2. Engine is cleaned and painted high heat silver. Head port and polish and resurfaced with valve job. New Wiseco flat top piston with rings and install on rod already. Piston will give more then 11.5:1 compression ratio. New seals from Toyota. All crank bearing surface are regrind to same size. New Topline bearings included. Block already honed. Valves are installed. Just need to put shim buckets in and check clearance. Extra shims in the 3S-FE head. Stock cam shafts. Also has 3S-GTE highflow oil pump. 4-1 header. A few sensors on coolant neck. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

10-29-2006, 07:16 PM	#2 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 02:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	but we've been waiting sooooo long.... __________________ www.martingouda.com.... the rumors are all true...

10-29-2006, 07:42 PM	#3 (permalink)
Pineapple Location: Toronto Posts: 4,282 Join Date: Jan 2004 Last On: Yesterday 01:05 AM	I won't be about to start the project again until 3-4 years later. Its better to sell it and get my money. Too many thing can change in 3 years. I'll keep it if I don't get good offer. I don't want to like it go any more then you. Last couple weeks was rough. Can't stop thinking what I should do. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

10-29-2006, 11:19 PM	#6 (permalink)
lpugfan2004 My Bubble Location: North Carolina Posts: 798 Join Date: Oct 2005 Last On: 09-29-2008 02:36 PM Vehicle: 2000 GT-S 6spd 2nd Vehicle: 2005 G6 GT	no he built it to be high hp N/A 5SFE which would be the first right? __________________

10-30-2006, 01:05 AM	#7 (permalink)
Pineapple Location: Toronto Posts: 4,282 Join Date: Jan 2004 Last On: Yesterday 01:05 AM	You can add turbo but low boost only. Not the first. People do that with MR-2 already. This should be one of the top HP NA 5S-FE. Get the Webcam regrind cams and it will be the top. So far people had done high compression or cam, not both. BTW Im not parting anything out. It'll be sold as a whole. I want to see how much HP this engine can do. I'll add Toyota factory repair manual for 90 Celica also. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

10-29-2006, 10:52 PM	#4 (permalink)
tankd0g Location: Nova Scotia, Canada Posts: 255 Join Date: Jun 2006 Last On: 11-10-2008 01:02 PM	Was this built to take a turbo or something?

10-29-2006, 11:13 PM	#5 (permalink)
hedgehog Location: East GTA Posts: 122 Join Date: Aug 2006 Last On: 04-27-2008 06:35 AM Vehicle: 05 4Runner 2nd Vehicle: 91 Celica Gts	id say no , 11.5:1 cr na motor , but you could replace the pistons... but this isnt my listing so ill stfu nice stuff though ;)

10-30-2006, 03:08 AM	#8 (permalink)
lpugfan2004 My Bubble Location: North Carolina Posts: 798 Join Date: Oct 2005 Last On: 09-29-2008 02:36 PM Vehicle: 2000 GT-S 6spd 2nd Vehicle: 2005 G6 GT	would have been awesome to see you finish it and seen a dyno video to see those numbers __________________

10-30-2006, 11:19 AM	#9 (permalink)
tankd0g Location: Nova Scotia, Canada Posts: 255 Join Date: Jun 2006 Last On: 11-10-2008 01:02 PM	I see, I was just wondering why so much money over a GTE, but that would be sweet to have if you could get it all working and tuned.

10-30-2006, 04:53 PM	#10 (permalink)
CiRiS91GT Location: Toronto, Ontario Posts: 1,758 Join Date: Jul 2005 Last On: 06-28-2008 12:23 PM Vehicle: '91 AllTrac 2nd Vehicle: '91 Celica GT	Re: Built 5S-FE If we can talk price a little bit, I'd be willing to give it a good home. I have a 5s on the floor right now, and this is basically what I was going to build it to, as I no longer want a boosted motor... pm me. __________________ -- 91 Celica GT 89 Suzuki GSX 750

10-30-2006, 08:51 PM	#11 (permalink)
DarkSideCelica Location: SoCal Posts: 224 Join Date: Oct 2006 Last On: 07-16-2007 01:20 PM Vehicle: 92 GT 2nd Vehicle: 99 Accord	Re: Built 5S-FE too bad u're in toronto... shipping would cost a lot i figured... i would take if u could lower the price a lil... i'm looking to to the 3sgte swap, but if this works out, then y not

10-30-2006, 09:04 PM	#12 (permalink)
DarkSideCelica Location: SoCal Posts: 224 Join Date: Oct 2006 Last On: 07-16-2007 01:20 PM Vehicle: 92 GT 2nd Vehicle: 99 Accord	Re: Built 5S-FE btw, how much power is it supposed to make? 220 ish?

10-31-2006, 01:39 AM	#13 (permalink)
Pineapple Location: Toronto Posts: 4,282 Join Date: Jan 2004 Last On: Yesterday 01:05 AM	Re: Built 5S-FE Probably around 180-200. Maybe more with regrind cams. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

10-31-2006, 01:56 PM	#14 (permalink)
CiRiS91GT Location: Toronto, Ontario Posts: 1,758 Join Date: Jul 2005 Last On: 06-28-2008 12:23 PM Vehicle: '91 AllTrac 2nd Vehicle: '91 Celica GT	Re: Built 5S-FE i wouldnt put it in without finishing it off ;) go big or dont even bother... isnt that how it goes??? :) __________________ -- 91 Celica GT 89 Suzuki GSX 750

10-31-2006, 02:32 PM	#15 (permalink)
Pineapple Location: Toronto Posts: 4,282 Join Date: Jan 2004 Last On: Yesterday 01:05 AM	Re: Built 5S-FE Yea, I planned to throw in the cams later due to money. With the cams, it should be the highest HP NA 5S-FE in North America. All the MR-2 guys will think you're God. Man I miss how the 5S sound. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

12-04-2006, 09:13 PM	#16 (permalink)
3sgekid Location: west covina Posts: 7 Join Date: Nov 2006 Last On: 12-15-2006 01:27 PM	Re: Built 5S-FE were you get those headers havin prblems finding them