My 90 GTS

**Pineapple** · 06-30-2004, 05:20 PM

**Ratko** · 06-30-2004, 05:21 PM

whoa! very clean 5th gen you got there

**boosted GT** · 06-30-2004, 08:25 PM

very nice!!! I like the sides, are you planning on adding a front lip too?

**MartinGouda** · 07-01-2004, 02:03 PM

and hes a good guy...hope the throttlebody helps ya

**Burrcold** · 07-01-2004, 03:30 PM

very nice...with rear and front lip you will have one very clean lookin ride

**RN2NVS** · 07-01-2004, 04:36 PM

very nice

**Pineapple** · 07-03-2004, 01:30 PM

Thanks :D
Don't think i'll add front and rear lip. Haven't found any good one that follow the stock lines of the car. Maybe I'll custom make a front lip. Something simple to lower the front a bit.
I'm still collecting parts for my engine work. Hopefully I'll get them next week and start the project ;)

This is what I'm working on now:

Here is how the gauge looks like, too much bling:

**MartinGouda** · 07-03-2004, 03:16 PM

those look good... very early 90's

how mcuh and where?

**Pineapple** · 07-03-2004, 11:37 PM

Princess Auto for the 2 chrome gauge, $10 and $20. JRP for the Fuel pressure gauge, $135. Gauge pod is from www.GaugePods.com.

**MartinGouda** · 07-04-2004, 01:36 PM

how are they connected to the car?

where on the engine do they go?...

i dont really care so much about the fuel pressure gauge but the other two??? are there existing connections?

i like the bling i think... they would match some of my stuff

**Pineapple** · 07-04-2004, 11:39 PM

The coolant temp is easy, there are plugs on the upeer hose nect on the engine. Remove one and put the sensors in. Oil pressure will be tricky. I try to put a tee on the stock oil pressure sensor and found out its not normal NPT pipe thread. Its something British pipe thread. I'll probably get my machince shop to make an adaptor for me :P Mechanical Enginer + machince shop = lots of DIY for the car

For the fuel pressure gauge I'll need to cut the rubber hose and put a tee in between.
All the gauges are electrical. I'll put blue LED in them so they light up like indiglow

Got check out Princess Auto, they got very good price when on sale. You can see sale list on their website.

**MartinGouda** · 07-05-2004, 08:56 AM

when you are done i have to see that....

i might want to do this too... if your machine shop can make a spare T let me know

**Pineapple** · 07-06-2004, 09:47 AM

I did made an extra nipple ;)

**MartinGouda** · 07-06-2004, 10:21 AM

that looks awsome...

count me in..but i think i am ogign to make em light red

**Pineapple** · 07-06-2004, 11:10 AM

I use blue LEDs. Red is even easier.
I'll see if I'll hit TN meet next Wed. Hope the gauges are in the car. Still wiring them.

**MartinGouda** · 07-06-2004, 12:05 PM

it looks really good... if you are goign to the meet let me know

06-30-2004, 05:20 PM	#1 (permalink)
Pineapple Location: Toronto Posts: 4,250 Join Date: Jan 2004 Last On: Yesterday 05:16 PM	My 90 GTS RIP __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw Last edited by Pineapple : 08-24-2006 at 11:00 AM.

07-01-2004, 02:03 PM	#4 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 01:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	and hes a good guy...hope the throttlebody helps ya __________________ www.martingouda.com.... the rumors are all true...

07-01-2004, 03:30 PM	#5 (permalink)
Burrcold Location: Toronto Posts: 6,414 Join Date: Oct 2003 Last On: Yesterday 09:35 PM Vehicle: 08 Lexus IS250 2nd Vehicle: 08 Acura CSX	very nice...with rear and front lip you will have one very clean lookin ride __________________

07-01-2004, 04:36 PM	#6 (permalink)
RN2NVS Moderator Location: Toronto Posts: 10,244 Join Date: Aug 2003 Last On: 06-30-2008 08:41 PM	very nice __________________

07-03-2004, 01:30 PM	#7 (permalink)
Pineapple Location: Toronto Posts: 4,250 Join Date: Jan 2004 Last On: Yesterday 05:16 PM	Thanks :D Don't think i'll add front and rear lip. Haven't found any good one that follow the stock lines of the car. Maybe I'll custom make a front lip. Something simple to lower the front a bit. I'm still collecting parts for my engine work. Hopefully I'll get them next week and start the project ;) This is what I'm working on now: Here is how the gauge looks like, too much bling: __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

06-30-2004, 05:21 PM	#2 (permalink)
Ratko it was all a dream Location: Toronto, Canada Posts: 9,863,211 Join Date: Oct 2003 Last On: 09-25-2008 11:05 PM Vehicle: 91 MR2 Turbo 2nd Vehicle: 96 Civic Hatch	whoa! very clean 5th gen you got there

06-30-2004, 08:25 PM	#3 (permalink)
boosted GT Location: Woodbridge Posts: 146 Join Date: Oct 2003 Last On: 06-01-2008 08:23 PM Vehicle: Lexus IS300	very nice!!! I like the sides, are you planning on adding a front lip too?

07-03-2004, 03:16 PM	#8 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 01:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	those look good... very early 90's how mcuh and where? __________________ www.martingouda.com.... the rumors are all true...

07-03-2004, 11:37 PM	#9 (permalink)
Pineapple Location: Toronto Posts: 4,250 Join Date: Jan 2004 Last On: Yesterday 05:16 PM	Princess Auto for the 2 chrome gauge, $10 and $20. JRP for the Fuel pressure gauge, $135. Gauge pod is from www.GaugePods.com. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

07-04-2004, 01:36 PM	#10 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 01:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	how are they connected to the car? where on the engine do they go?... i dont really care so much about the fuel pressure gauge but the other two??? are there existing connections? i like the bling i think... they would match some of my stuff __________________ www.martingouda.com.... the rumors are all true...

07-04-2004, 11:39 PM	#11 (permalink)
Pineapple Location: Toronto Posts: 4,250 Join Date: Jan 2004 Last On: Yesterday 05:16 PM	The coolant temp is easy, there are plugs on the upeer hose nect on the engine. Remove one and put the sensors in. Oil pressure will be tricky. I try to put a tee on the stock oil pressure sensor and found out its not normal NPT pipe thread. Its something British pipe thread. I'll probably get my machince shop to make an adaptor for me :P Mechanical Enginer + machince shop = lots of DIY for the car For the fuel pressure gauge I'll need to cut the rubber hose and put a tee in between. All the gauges are electrical. I'll put blue LED in them so they light up like indiglow Got check out Princess Auto, they got very good price when on sale. You can see sale list on their website. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

07-05-2004, 08:56 AM	#12 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 01:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	when you are done i have to see that.... i might want to do this too... if your machine shop can make a spare T let me know __________________ www.martingouda.com.... the rumors are all true...

07-06-2004, 09:47 AM	#13 (permalink)
Pineapple Location: Toronto Posts: 4,250 Join Date: Jan 2004 Last On: Yesterday 05:16 PM	I did made an extra nipple ;) __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

07-06-2004, 10:21 AM	#14 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 01:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	that looks awsome... count me in..but i think i am ogign to make em light red __________________ www.martingouda.com.... the rumors are all true...

07-06-2004, 11:10 AM	#15 (permalink)
Pineapple Location: Toronto Posts: 4,250 Join Date: Jan 2004 Last On: Yesterday 05:16 PM	I use blue LEDs. Red is even easier. I'll see if I'll hit TN meet next Wed. Hope the gauges are in the car. Still wiring them. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

07-06-2004, 12:05 PM	#16 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 01:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	it looks really good... if you are goign to the meet let me know __________________ www.martingouda.com.... the rumors are all true...