After a good cleaning

[ndto]

It was a nice day so i spent a couple hours cleaning the inside and out of my car, i learned that if you need cash look under your drivers seat haha

[ndto]

[MartinGouda]

very nice rims..... slam that girl and you'll have one of the nicer celica's on the site for sure

[Burrcold]

Looks good!

[Ratko]

agreed... very nice rims slam it.

[ndto]

thanks guys, The rims were painted by myself and a friend, after being quoted 200 and up just for one rim we decided that we would try the duplicolour stuff, the result was great I would highly recommend it to anyone looking to paint their rims

ive really had to be patient with this car, its taken a lot a cash and hard work just to get some of the parts i have for it,

The plan is for the car to go into the shop for paint and body work in July but before then im seriously considering lowering on KYB gr2 and Sportlines,

than after the lowering I will finally pick up the spacers for the front and back ( the back is way too sunk right now)

and after paint im going to source out an aeromagic front lip or make my own and the car will finally be finished


But on a side note im looking for a spare drivers seat with the electronic lumbar with rails if anyone has one itd be much appreciated

[still_stoned]

good stuff.

As for painting rims with that duplicolor spray can, I've painted enough rims with those and the results are always awesome. I also recommend that stuff.

[Locker]

Originally Posted by ndto

But on a side note im looking for a spare drivers seat with the electronic lumbar with rails if anyone has one itd be much appreciated

I've actually done the dual power lumbar a few times. Its not the hardest thing to do but you will need to set aside some time.

Basically all you need is a spare drivers seat and an extra Lumbar switch. What I did was remove all the hog ties from the seat and you'll find the skeleton of the seat with the lumbar wire up in there. simply remove the skeleton from your current passenger seat and and put it all back together. I installed my drivers lumbar switch just to the left of the shifter and put the passenger side switch in the stock Drivers location.

Colin has my leathers with them intalled. Not sure if he has the passenger seat wired up yet though.
One of the sillyest mods I did to my car but also one that left me feeling quite proud. Yes my 91 has dual power lumbar :D

[Locker]

Originally Posted by ndto

But on a side note im looking for a spare drivers seat with the electronic lumbar with rails if anyone has one itd be much appreciated

I've actually done the dual power lumbar a few times. Its not the hardest thing to do but you will need to set aside some time.

Basically all you need is a spare drivers seat and an extra Lumbar switch. What I did was remove all the hog ties from the seat and you'll find the skeleton of the seat with the lumbar wire up in there. simply remove the skeleton from your current passenger seat and and put it all back together. I installed my drivers lumbar switch just to the left of the shifter and put the passenger side switch in the stock Drivers location.

Colin has my leathers with them intalled. Not sure if he has the passenger seat wired up yet though.
One of the sillyest mods I did to my car but also one that left me feeling quite proud. Yes my 91 has dual power lumbar :D

[CiRiS91GT]

Originally Posted by Locker

I've actually done the dual power lumbar a few times. Its not the hardest thing to do but you will need to set aside some time.

Basically all you need is a spare drivers seat and an extra Lumbar switch. What I did was remove all the hog ties from the seat and you'll find the skeleton of the seat with the lumbar wire up in there. simply remove the skeleton from your current passenger seat and and put it all back together. I installed my drivers lumbar switch just to the left of the shifter and put the passenger side switch in the stock Drivers location.

Colin has my leathers with them intalled. Not sure if he has the passenger seat wired up yet though.
One of the sillyest mods I did to my car but also one that left me feeling quite proud. Yes my 91 has dual power lumbar :D

yes it is wired, and yes it was truly appreciated :)

my 91 has duel power lumbar - i tell people that and they say "didn't it come like that??" lol

[1stcelica]

i can't get over how nice that type of rim looks on the 5th gen.. i used to only like the look of 5 spoked ones. where did you get those???

[ndto]

hmm if its been done before then i think i will persue the idea, but my original thought was to splice the wires from the passenger seat into the exisiting drivers seat so when i tighten the grip of the drivers seat the passenger feels it too,

so all i have to do is take the guts from the extra seat and put it into my existing seat?



And the rims were bought online from some guy in Kitchener, i think the brand is HP racing or something but the condition they were purchased in was terrible, the faces had deep scratches and small pieces of metal missing but after a lot of sanding and careful prep before paint i think they turned out really good.

[CiRiS91GT]

that would be called "a sure way to blow a fuse"

[ndto]

oh shit ok well i guess ill wire them up seperatly

[DarkSideCelica]

wow.... great job with the car... get a drop and it'll look perfect! where u gonna get an aeromagic lip anyways? those things are rare!

[ndto]

haha im gonna cross my fingers and hope like hell, but in the mean time im going to start experimenting with other lips first, from other cars