I need an idea on pricing for body work

**nem** · 07-14-2005, 12:07 AM

My front driver side corner panel got punchd in tonight. Was wondering how much I would need fork out to get it replaced and painted? A grand? more? less?

**1stcelica** · 07-14-2005, 12:08 AM

they sell them on ebay for fairly cheap, then all you have to do is paint it..not sure how much that will cost though.

**RN2NVS** · 07-14-2005, 08:42 AM

how big is it
is it the quater panel or fender?

**nem** · 07-14-2005, 09:15 AM

It's a good section of the front driver side right above the tire.

As for the ebay tip, thanks...never thought to look.

CONTROL ONE · 07-14-2005, 09:17 AM

www.car-part.com and select Ontario when you search.

**RN2NVS** · 07-14-2005, 09:24 AM

i couldnt see it being $1000+
hard to say without seeing the damage

all depends
will the fender have to be replaced
can you paint just the fender if its repaired, more then likely you will have to blend the paint or maybe even paint the front of the car

theres a lot it depends on

**supershyguy** · 07-14-2005, 09:52 AM

If its only the fender. it would be around Fender Cost (Guessing around $300) and $200 - $300 Paint.

**nem** · 07-14-2005, 10:01 AM

The quarter panel is pouched. As for the bumper, there is some scuffs no scrathes. Thank god a riased pickup's bumber hit me and only got me in one section.

**RN2NVS** · 07-14-2005, 10:02 AM

are they paying for it?

**nem** · 07-14-2005, 10:18 AM

Hit and run. I saw it happen, got in my car and went chasing, but with gf in the car....I only got so far and she started to whine

**RN2NVS** · 07-14-2005, 10:25 AM

fuck man that sucks
didnt get a plate or anything ?

**Pineapple** · 07-14-2005, 10:26 AM

^My GF was happy last time I force an idiot off the road and he start following me and throwing bottles at me.
Next time get their plate and call the cops. A photo would be nice.

**nem** · 07-14-2005, 10:37 AM

Ya, trust me...it sucks. By the time me and my gf ran to the car, he already saw me and took off. I only got about 1/2 a block from him before I was forced to give up. It was a 1994-1998 green F150, raised 6-12". Never got the plate numbers.

**MAT 90GT S** · 07-14-2005, 02:13 PM

buddy if your in the GTA come see the work done on my car,buddy will quote you on the spot $$$

**nem** · 07-14-2005, 02:41 PM

I live in North York. Where is your buddy located?

**MAT 90GT S** · 07-14-2005, 03:08 PM

kennedy and lawrence

**MAT 90GT S** · 07-14-2005, 04:49 PM

My guy says he has time on MOnday so we can meet up afterwork
LMK

**nem** · 07-14-2005, 05:36 PM

I'm putting in 12 hour days all next week. PM when you have a second.

07-14-2005, 12:07 AM	#1 (permalink)
nem Posts: 291 Join Date: Oct 2003 Last On: 06-03-2008 10:05 AM	I need an idea on pricing for body work My front driver side corner panel got punchd in tonight. Was wondering how much I would need fork out to get it replaced and painted? A grand? more? less?

07-14-2005, 08:42 AM	#3 (permalink)
RN2NVS Moderator Location: Toronto Posts: 10,244 Join Date: Aug 2003 Last On: 06-30-2008 08:41 PM	how big is it is it the quater panel or fender? __________________

07-14-2005, 09:24 AM	#6 (permalink)
RN2NVS Moderator Location: Toronto Posts: 10,244 Join Date: Aug 2003 Last On: 06-30-2008 08:41 PM	i couldnt see it being $1000+ hard to say without seeing the damage all depends will the fender have to be replaced can you paint just the fender if its repaired, more then likely you will have to blend the paint or maybe even paint the front of the car theres a lot it depends on __________________

07-14-2005, 09:52 AM	#7 (permalink)
supershyguy Posts: 80 Join Date: Nov 2003 Last On: 10-07-2005 03:34 PM	If its only the fender. it would be around Fender Cost (Guessing around $300) and $200 - $300 Paint. __________________

07-14-2005, 10:02 AM	#9 (permalink)
RN2NVS Moderator Location: Toronto Posts: 10,244 Join Date: Aug 2003 Last On: 06-30-2008 08:41 PM	are they paying for it? __________________

07-14-2005, 12:08 AM	#2 (permalink)
1stcelica Location: dubuque,iowa Posts: 983 Join Date: Mar 2005 Last On: 02-10-2008 10:32 PM	they sell them on ebay for fairly cheap, then all you have to do is paint it..not sure how much that will cost though.

07-14-2005, 09:15 AM	#4 (permalink)
nem Posts: 291 Join Date: Oct 2003 Last On: 06-03-2008 10:05 AM	It's a good section of the front driver side right above the tire. As for the ebay tip, thanks...never thought to look.

07-14-2005, 09:17 AM	#5 (permalink)
CONTROL ONE Banned Location: Toronto Posts: 3,113 Join Date: Sep 2003 Last On: 05-31-2006 10:05 AM	www.car-part.com and select Ontario when you search.

07-14-2005, 10:01 AM	#8 (permalink)
nem Posts: 291 Join Date: Oct 2003 Last On: 06-03-2008 10:05 AM	The quarter panel is pouched. As for the bumper, there is some scuffs no scrathes. Thank god a riased pickup's bumber hit me and only got me in one section.

07-14-2005, 10:18 AM	#10 (permalink)
nem Posts: 291 Join Date: Oct 2003 Last On: 06-03-2008 10:05 AM	Hit and run. I saw it happen, got in my car and went chasing, but with gf in the car....I only got so far and she started to whine

07-14-2005, 10:25 AM	#11 (permalink)
RN2NVS Moderator Location: Toronto Posts: 10,244 Join Date: Aug 2003 Last On: 06-30-2008 08:41 PM	fuck man that sucks didnt get a plate or anything ? __________________

07-14-2005, 10:26 AM	#12 (permalink)
Pineapple Location: Toronto Posts: 4,248 Join Date: Jan 2004 Last On: Today 07:02 PM	^My GF was happy last time I force an idiot off the road and he start following me and throwing bottles at me. Next time get their plate and call the cops. A photo would be nice. __________________ http://photos.yahoo.com/fredericklaw http://members.rankmyride.com/pineapplelaw

07-14-2005, 10:37 AM	#13 (permalink)
nem Posts: 291 Join Date: Oct 2003 Last On: 06-03-2008 10:05 AM	Ya, trust me...it sucks. By the time me and my gf ran to the car, he already saw me and took off. I only got about 1/2 a block from him before I was forced to give up. It was a 1994-1998 green F150, raised 6-12". Never got the plate numbers.

07-14-2005, 02:13 PM	#14 (permalink)
MAT 90GT S Location: RiCHMOND HILL/GTA Ontario,Canada Posts: 408 Join Date: Apr 2005 Last On: 11-02-2006 09:48 PM	buddy if your in the GTA come see the work done on my car,buddy will quote you on the spot $$$ __________________ 90 GTS sonn2b SHWAPPED, hmmm hope before tarmac gets cold! FLAT BLACK(with white/red freckles) JDM HooD SCRATCHEDDDD Have nice high en HP LJ 4600d color printers 8.5x11.5 only

07-14-2005, 02:41 PM	#15 (permalink)
nem Posts: 291 Join Date: Oct 2003 Last On: 06-03-2008 10:05 AM	I live in North York. Where is your buddy located?

07-14-2005, 03:08 PM	#16 (permalink)
MAT 90GT S Location: RiCHMOND HILL/GTA Ontario,Canada Posts: 408 Join Date: Apr 2005 Last On: 11-02-2006 09:48 PM	kennedy and lawrence __________________ 90 GTS sonn2b SHWAPPED, hmmm hope before tarmac gets cold! FLAT BLACK(with white/red freckles) JDM HooD SCRATCHEDDDD Have nice high en HP LJ 4600d color printers 8.5x11.5 only

07-14-2005, 04:49 PM	#17 (permalink)
MAT 90GT S Location: RiCHMOND HILL/GTA Ontario,Canada Posts: 408 Join Date: Apr 2005 Last On: 11-02-2006 09:48 PM	My guy says he has time on MOnday so we can meet up afterwork LMK __________________ 90 GTS sonn2b SHWAPPED, hmmm hope before tarmac gets cold! FLAT BLACK(with white/red freckles) JDM HooD SCRATCHEDDDD Have nice high en HP LJ 4600d color printers 8.5x11.5 only

07-14-2005, 05:36 PM	#18 (permalink)
nem Posts: 291 Join Date: Oct 2003 Last On: 06-03-2008 10:05 AM	I'm putting in 12 hour days all next week. PM when you have a second.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search