Celica GT-S 2004 wheels

[1GabUp]

Hi all! I would like to change the wheels on my Celica GT-S 2004 for a set of Stern's ST-10 GRANS wheels. I would like to know if a wheel with these specs could fit my car :

Size : 18x8.50
PCD : 5x100
Offset : 35
Part # : ST1085851035C

Thanks a lot for your help!
Gab

[1GabUp]

Nobody can help me with my interrogation? :(

[RWCustoms]

should be fine

[dirtking]

Even though a wheel dimension of 18” dia X 8.5” width seems to be a non issue I guess the next question would be wheel positive offset limits. Please note that “wheel offset” is measured in either Positive Offset (the higher the measurement the more the wheel recesses into the wheel well) and Negative Offset (the higher the measurement the more the wheel sticks out of the wheel well) And “NO” offset means the wheel mounting flange is equal to the Wheel Center line. I shopped around on-line for 2004 Celica GT wheels and the POS OFFSET limits I found ranged from 35mm to 45mm so it sounds like your in the ball park but I am far from a wheel/tire expert. Here is a web site that may be helpful to you in reference to “Wheel Technical Information” https://www.rsracing.com/tech-wheel.html#fitting

Hope this helps.

Mook

[1GabUp]

Thanks guys for your help! :)