02 GTS Rolling Road Dyno mixed results ?

[Seven Of Nine]

Just got back from a Rolling Road today 4 Celica's various gens 1x gen5 2 x gen 6 (one SS2 other SS1) - 1 x gen 7 GTS (me) and one Honda DC5 Type R.

My car 02 Celica GTS lower rev limit. DYNO in 5th gear.


Can someone please look at this and check if it looks ok or not. Feeling from the others some of which have had DYNO's done at other places said the graphs and figures across the range for all 5 cars were very low.

my mods:-

TRD flywheel - TRD LSD - RMM exhaust - RMM Intake - Happies grounding kit - Johnny GTS crank pulley - AEM alt pulley - UR Water pump Pulley - basic P&P to intake manifold. rims 18" x 8" Racing hart CR's

Hoping to get some pics up later also vid.

The "sencas" was the DYNO was down about 13% hp but I don't know just going by what the others have said. but the power loss was alot on each car.

Gonna get another DYNO done after christmas different place and see what the results are.

[04gtscelica]

try the stock 16" rims or some lighter rims. i have 19"trd rims and i lost a lot of hp. thay look nice for show but not for racing there to havey

[Seven Of Nine]

Unfortunately sold the stock 17" rims couple of years ago. hense the 18" x 8" Racing Hart CR's. Am looking for lighter 18"'s something similar to SSR type-C's / Comps. But got a feeling those rollers were very conservative as the other guys who had dynos done else where, had much higher gains. Tempted to get another done soon different place, as need a custom midpipe and axal back manufactured. But yep those rims i've got are certainly alot heavier, also the AEM Rotors comming to think of it.