My AT200 project and my hello

**playr158** · 01-03-2006, 02:08 AM

HELLO!
and now lets get down to business
start celica AT200 (ST) 1996 7afe M/T
went through 1 celica bodykit, 1 custom supra front end (bomex bumper 93-00 supra headlights) and numerous other toys and now i'm starting over

and the pictuers tell all

**playr158** · 01-03-2006, 02:08 AM

**playr158** · 01-03-2006, 02:08 AM

**playr158** · 01-03-2006, 02:09 AM

**playr158** · 01-03-2006, 02:09 AM

**playr158** · 01-03-2006, 02:10 AM

this is me!

**playr158** · 01-03-2006, 02:13 AM

THIS IS HOW we finish up a night!

oh and if you can't tell he's using the windshield washer fluid neck to do that ^^^

well more work has been done

STEP 1: remove exhaust and check out the dirty greasy bay

now i have it out in 1 solid piece downpipe to mufflers (really bad exhaust job)

**playr158** · 01-03-2006, 02:13 AM

here she is getting pulled out of the garage for some power washing!!!
WOOT WORLDS FASTEST JOHN DEERE POWERED CELICA!!!!!

all clean!

and back inside she goes

now for tonight (sunday)
time to get her up in the air

Look ma i can float

under the car up to firewall

driver side wheel

passenger side

under car front to back

brake line covering

rear under car and gas tank

pass side rear

driver side rear

back to front under

**playr158** · 01-03-2006, 02:13 AM

removed caliper (front)

actual caliper

knuckle and hub

rotor removed

lower ball joint, control arm

removed knuckle and hub

wheel well after knuckle hub removed

removed coilover/strut combo

antisway bar end link

how to remove it

rear brake line to drum

rear brake suspension assembly

rear brake line at body

rear antisway bar end link

drum

rear brake/ebrake and hub

how to extract hub

breaker bars are my hero!

removed hub

removed brake assembly

all coilover shock assemblies

rear knuckle

front

back

under stripped car

**Burrcold** · 01-03-2006, 07:24 AM

that's a lot of work...are you rebuilding it from the ground up?

**MartinGouda** · 01-03-2006, 08:28 AM

looks promising

**playr158** · 01-03-2006, 08:44 AM

yes i am building it from the ground up most likely i'll be starting with suspension

here is a bulk of the suspension parts i'll be using

along with most likely a ST185 3sgte swap and probably upgrade on a few of its parts

carbon fiber hood and hatch and i might potentially carbon fiber wrap the roof and pillars in carbon fiber as well..

and a custom body kit to boot

**MartinGouda** · 01-03-2006, 08:50 AM

anyone that puts that much time into his excel program for his car means business or means well.

**Arabian_Knight** · 01-03-2006, 09:44 AM

looks like you got a great project going on, when is your expected date of completion, summer?

**Lil_lissa** · 01-03-2006, 11:45 AM

good luck!

**playr158** · 01-03-2006, 12:35 PM

expected date there really isn't one, i got tons of time and will build as money comes and i have time
i'm hoping next winter if not summer of 2007

01-03-2006, 02:08 AM	#1 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	My AT200 project and my hello HELLO! and now lets get down to business start celica AT200 (ST) 1996 7afe M/T went through 1 celica bodykit, 1 custom supra front end (bomex bumper 93-00 supra headlights) and numerous other toys and now i'm starting over and the pictuers tell all __________________

01-03-2006, 02:08 AM	#2 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	__________________

01-03-2006, 02:08 AM	#3 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	__________________

01-03-2006, 02:09 AM	#4 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	__________________

01-03-2006, 02:09 AM	#5 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	__________________

01-03-2006, 02:10 AM	#6 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	this is me! __________________

01-03-2006, 02:13 AM	#7 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	THIS IS HOW we finish up a night! oh and if you can't tell he's using the windshield washer fluid neck to do that ^^^ well more work has been done STEP 1: remove exhaust and check out the dirty greasy bay now i have it out in 1 solid piece downpipe to mufflers (really bad exhaust job) __________________

01-03-2006, 02:13 AM	#8 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	here she is getting pulled out of the garage for some power washing!!! WOOT WORLDS FASTEST JOHN DEERE POWERED CELICA!!!!! all clean! and back inside she goes now for tonight (sunday) time to get her up in the air Look ma i can float under the car up to firewall driver side wheel passenger side under car front to back brake line covering rear under car and gas tank pass side rear driver side rear back to front under __________________

01-03-2006, 02:13 AM	#9 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	removed caliper (front) actual caliper knuckle and hub rotor removed lower ball joint, control arm removed knuckle and hub wheel well after knuckle hub removed removed coilover/strut combo antisway bar end link how to remove it rear brake line to drum rear brake suspension assembly rear brake line at body rear antisway bar end link drum rear brake/ebrake and hub how to extract hub breaker bars are my hero! removed hub removed brake assembly all coilover shock assemblies rear knuckle front back under stripped car __________________

01-03-2006, 07:24 AM	#10 (permalink)
Burrcold Location: Toronto Posts: 6,414 Join Date: Oct 2003 Last On: Yesterday 08:11 PM Vehicle: 08 Lexus IS250 2nd Vehicle: 08 Acura CSX	that's a lot of work...are you rebuilding it from the ground up? __________________

01-03-2006, 08:28 AM	#11 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 01:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	looks promising __________________ www.martingouda.com.... the rumors are all true...

01-03-2006, 08:44 AM	#12 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	yes i am building it from the ground up most likely i'll be starting with suspension here is a bulk of the suspension parts i'll be using along with most likely a ST185 3sgte swap and probably upgrade on a few of its parts carbon fiber hood and hatch and i might potentially carbon fiber wrap the roof and pillars in carbon fiber as well.. and a custom body kit to boot __________________

01-03-2006, 08:50 AM	#13 (permalink)
MartinGouda USE THE SEARCH FEATURE!!! Location: Streetsville Posts: 12,023 Join Date: Oct 2003 Last On: 06-02-2008 01:41 PM Vehicle: DelsolTurboN2O 2nd Vehicle: Talon TSI AWD	anyone that puts that much time into his excel program for his car means business or means well. __________________ www.martingouda.com.... the rumors are all true...

01-03-2006, 09:44 AM	#14 (permalink)
Arabian_Knight AK47 Location: Richmond Hill Posts: 3,800 Join Date: May 2005 Last On: 02-09-2008 01:14 AM Vehicle: G35 Coupe 6MT 2nd Vehicle: Swapped 5th gen	looks like you got a great project going on, when is your expected date of completion, summer? __________________

01-03-2006, 11:45 AM	#15 (permalink)
Lil_lissa biker bitch Location: Cambridge Posts: 4,483 Join Date: Dec 2003 Last On: 09-16-2008 01:22 PM Vehicle: 04 Suzuki GS500 2nd Vehicle: 95 Intrepid	good luck! __________________ lissa \| 1997 Ford F150 Lariat 4x4

01-03-2006, 12:35 PM	#16 (permalink)
playr158 Location: Virginia Posts: 16 Join Date: Jan 2006 Last On: 09-17-2008 03:09 PM	expected date there really isn't one, i got tons of time and will build as money comes and i have time i'm hoping next winter if not summer of 2007 __________________

01-03-2006, 05:52 PM	#17 (permalink)
Locker hunting for a MR2 shell Location: Thornton, ON Posts: 3,153