![]() |
![]() |
|||||||||||||||||||||||||
|
|
||||||||||||||||||||||||||
|
|||||||
| 5th Generation Celica (ST182/184/185) [1990-1993] |
![]() |
|
|
LinkBack | Thread Tools | Search this Thread |
|
|
#1 (permalink) |
![]() Location: Kentucky
Posts: 4
Join Date: Jul 2006
Last On: 07-20-2006 10:17 AM
|
brakes and axles
I have a 93 Celica GT convertible. I called to order new axles because mine are popping like crazy and the dude asked me if I had ABS brakes. Is there an easy way to tell if I do? If I have to remove the wheel what should I look for? Also does anyone know where a good write-up is on changing the axles or have any tips/advice otherwise. Thanks!
|
|
|
|
|
|
#3 (permalink) |
![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Toronto
Posts: 4,299
Join Date: Jan 2004
Last On: Today 07:48 PM
|
Go for a drive in wet, gravel, sand road. Hard the brake hard when its safe to do so. If the padel bounce while you holding it down and tire don't slide, you got ABS. Also you can see teeth aroung the axle/hub if you have ABS.
|
|
|
|
|
|
#4 (permalink) | |
|
Workin on the Alltrac
![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Newmaket
Posts: 3,221
Join Date: Oct 2003
Last On: Today 10:25 AM
Vehicle: 06 frontier
2nd Vehicle: 1990 alltrac
|
you can also pop your hood and see if there is a ABS unit. its a big giant box with lots of hard lines coming off it.
Changing axels is easy..... Jack up car and remove wheels Have someone step on break and remove the axel nuts. remove the two 22mm bolts in the syspension. get underneath car with 2 small pry bars and pop axel out of tranny. remove axel from hub and install new ones.... put it back together
__________________
![]() Quote:
|
|
|
|
|
|
|
#5 (permalink) | |
![]() Location: Kentucky
Posts: 4
Join Date: Jul 2006
Last On: 07-20-2006 10:17 AM
|
Quote:
Y, it has a light and it's on all the time.. BUT this car has a rebuilt title so I have no idea if this is even the original dash or anything else. I've never felt the abs engage, but then I'm not sure I would notice since I've never had a car w/ abs before. |
|
|
|
|
|
|
#6 (permalink) | |
![]() Location: Kentucky
Posts: 4
Join Date: Jul 2006
Last On: 07-20-2006 10:17 AM
|
Quote:
thanks. Where would the ABS unit be located under the hood exactly? |
|
|
|
|
|
|
#7 (permalink) | |
|
Workin on the Alltrac
![]() ![]() ![]() ![]() ![]() ![]() ![]() Location: Newmaket
Posts: 3,221
Join Date: Oct 2003
Last On: Today 10:25 AM
Vehicle: 06 frontier
2nd Vehicle: 1990 alltrac
|
hmmm can't remember... at the front.. by one of the headlights... my celica doesn't have it but I've pulled it out begore
__________________
![]() Quote:
|
|
|
|
|
|
|
#8 (permalink) |
![]() ![]() ![]() ![]() ![]() Location: MA
Posts: 290
Join Date: May 2006
Last On: 03-29-2007 01:15 AM
|
It is right behind the right side [if your sitting in the car] headlight.
Between it and the strut tower. If your abs doesnt' work[and you don't want it back], or you dont have it, it wont' matter which you get. The only difference is the toothed ring on the out joint of the abs axles.
__________________
|
|
|
|