NO POWER TO IGNITION! '86 celica

**ToyoTaM** · 06-23-2005, 12:53 AM

well i was drivin one day and all of a sudden everything jsut shutdown, so i pulled over and try to start my car nothin. put the key in and no crank, no sound. so i hot-wired the car and the car was fine, i tapped some wired into the ignition, so im guessin no power to ignition, my relay is clickin, should it be doin that, dunno, kinda stumped, if any one has ANY info that would be peachy. TaM '86 Celcia GT

**ToyoTaM** · 06-24-2005, 01:57 PM

i think it may be the fuse box inside the engine bay. can those fuse boxes go out??? some of the wires plug into it doesnt have power goin through it, and i try tappin those wires directly to the battery and the wires work.

**Anonymous** · 08-23-2005, 09:26 PM

The same thing happens to my celica st162. I have to roll start it about once a week.

**Anonymous** · 08-24-2005, 09:12 PM

have you checked the ignition barrel switch? might be a loose wire or bad connection ? could also be the starter relay - if youve fitted a starter motor recently check the earth hasnt detached itself, or the solenoid connecting wire

hope this helps

**Anonymous** · 08-24-2005, 09:15 PM

im assuming you get all the ignition lights on too, turn then nothing, use a piece of wood (thin enough to reach the starter motor), and hit the wood with a hammer - it might be the starter motor sticking... best of luck

**Edward_H** · 08-24-2005, 09:42 PM

yea it might be a flat spot on your starter.. try the wood and hammer trick and see..

**Kenny Schmitt** · 11-21-2005, 10:34 PM

Any part for a 1986 Toyota Celica GT and everything works but most of the body is hopless. If anyone needs any part for this car with the 2se email me at gnbmxer@hotmail.com......I need to do somthing with it

**Kenny Schmitt** · 11-21-2005, 10:35 PM

Any part for a 1986 Toyota Celica GT and everything works but most of the body is hopless. If anyone needs any part for this car with the 2se email me at gnbmxer@hotmail.com ......I need to do somthing with it

06-23-2005, 12:53 AM	#1 (permalink)
ToyoTaM Location: Minnesota Posts: 2 Join Date: Jun 2005 Last On: 07-05-2005 03:32 AM	NO POWER TO IGNITION! '86 celica well i was drivin one day and all of a sudden everything jsut shutdown, so i pulled over and try to start my car nothin. put the key in and no crank, no sound. so i hot-wired the car and the car was fine, i tapped some wired into the ignition, so im guessin no power to ignition, my relay is clickin, should it be doin that, dunno, kinda stumped, if any one has ANY info that would be peachy. TaM '86 Celcia GT

08-24-2005, 09:42 PM	#6 (permalink)
Edward_H Location: Toronto (Scarborough), Ontario Posts: 7 Join Date: Jul 2004 Last On: 07-21-2007 08:04 PM	yea it might be a flat spot on your starter.. try the wood and hammer trick and see.. __________________ RIP: Sept 14, 2005 @ 4:30am Reborn: 88 alltrac.. Spec's: To make 350-400 Steetable hp when done! yes it looks like crap but can you say that you own a 88 Celica Alltrac?

11-21-2005, 10:34 PM	#7 (permalink)
Kenny Schmitt Location: great neck new york Posts: 8 Join Date: Nov 2005 Last On: 11-29-2005 05:33 PM	Any part for a 1986 Toyota Celica GT and everything works but most of the body is hopless. If anyone needs any part for this car with the 2se email me at gnbmxer@hotmail.com......I need to do somthing with it __________________ Need to sell some parts from my 1986 toyota celica GT w/ 2SE Engine

11-21-2005, 10:35 PM	#8 (permalink)
Kenny Schmitt Location: great neck new york Posts: 8 Join Date: Nov 2005 Last On: 11-29-2005 05:33 PM	Any part for a 1986 Toyota Celica GT and everything works but most of the body is hopless. If anyone needs any part for this car with the 2se email me at gnbmxer@hotmail.com ......I need to do somthing with it __________________ Need to sell some parts from my 1986 toyota celica GT w/ 2SE Engine

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

06-24-2005, 01:57 PM	#2 (permalink)
ToyoTaM Location: Minnesota Posts: 2 Join Date: Jun 2005 Last On: 07-05-2005 03:32 AM	i think it may be the fuse box inside the engine bay. can those fuse boxes go out??? some of the wires plug into it doesnt have power goin through it, and i try tappin those wires directly to the battery and the wires work.

08-23-2005, 09:26 PM	#3 (permalink)
Anonymous Posts: 16 Join Date: Aug 2003 Last On: 12-31-1969 07:00 PM	The same thing happens to my celica st162. I have to roll start it about once a week.

08-24-2005, 09:12 PM	#4 (permalink)
Anonymous Posts: 16 Join Date: Aug 2003 Last On: 12-31-1969 07:00 PM	have you checked the ignition barrel switch? might be a loose wire or bad connection ? could also be the starter relay - if youve fitted a starter motor recently check the earth hasnt detached itself, or the solenoid connecting wire hope this helps

08-24-2005, 09:15 PM	#5 (permalink)
Anonymous Posts: 16 Join Date: Aug 2003 Last On: 12-31-1969 07:00 PM	im assuming you get all the ignition lights on too, turn then nothing, use a piece of wood (thin enough to reach the starter motor), and hit the wood with a hammer - it might be the starter motor sticking... best of luck