[Seven Of Nine]

Can't you bypass this, we don't use the breather over here.

http://www.pro-xdesign.50megs.com/cg...M%20Intake.jpg

Copy and pate link into IE window it it does'nt load.
--------------------------------

If your intake has a breather hole block it off, the upper air sensor i bolted to the heat shield. The lower sensor blue plug secure somewhere as it is disconnected. Now to the left of the heat shield see the blue and black shape thats the one way vacume valve. get red of the T-piece and pipes to the right, so the valve is just connected to the pipe from the left............. then use a short length of piping from the black end of the valve into the small silver tube on the throttle bodie. Thats all.