[Seven Of Nine]

Just read this NC.org the GT has now got Crower performance cams. By the looks of things TPR is also gonna be producing a set.

See attached pdf file.

Pricing is $438 for the pair, $356 for the spring and titanium retainer kit.

Cams are new blanks (intake and exhaust), fully tested.

Thanks for your interest in Crower,

Crower Cams & Equipment Co Inc
6180 Business Center Court
San Diego CA 92154-5604 USA
Phone: 619-661-6477
Fax: 619-661-6466
http://www.crower.com

stage 1: Street use with emphasis on bottom to mid-range power.....can be used with stock retainers and stock rev-limiter. RPM range idle to 7000+ rpm. Lobe Center 114 DEG. Duration is 268 / 260..... even though stock is 274 / 260......however, duration at .050" of lift stock is 204 / 195..... and stage 1 is 220 / 209

Stage 2: Designed specifically for supercharger / turbo, and their Titanium retainers must be used with the cams.......duration is 262 / 262, and 211/211 at .050" of lift

Stage 3: Spring / Retainer kit required.....Designed for street/Strip NA engines....rev range 1000 rpm to 7800 plus......duration is 272 / 272!!! and at .050" of lift they are at 224 / 224....lobe duration is 112 DEG.

STAGE 4, FULL RACE::: Spring / retainer kit required....RADICAL track use, requires ECU upgrade...rough idle....a gigantic 280 / 280duration at .010" of lift....and 232 / 232 at .050" of lift....... FINALLY......THANK GOD....and Crower