Celica Forums - Celispeed.com - View Single Post

**tempeheat** · 05-29-2007, 10:21 AM

If anyone is doing a 3sgte swap into a auto car, I found that the flywheel on a Lexus LS400 has the same 8 bolt pattern. I drilled my own holes in a auto flywheel from a 3SFE before I came upon the 1UZ flywheel. I think the 4age flywheel is also a 8 Bolt pattern, but not sure. Also if anyone is needing to make a wiring harness because they were scamed into buying a 3SGTE without the front clip (as my friend was by Nippon Motors). What I did was to use the two plugs to the ECU from the 3SFE that were the same and then I went to a salvage yard and bought two ECU plugs with about a foot of wires from a 90 Toyota Camry. I cut the two plugs carefully with a Dremel cutting wheel and glued them together with epoxy. I still ended up needing the AFM, Injector resistor, boost pressure sensor, and who knows what else since I'm waiting on a AFM and Boost sensor to make it run. I also noticed that the ignitor from the 3SFE has the same part number as a Lexus LS400 and the 3SGTE.

05-29-2007, 10:21 AM	#1 (permalink)
tempeheat Location: indianapolis Posts: 13 Join Date: May 2007 Last On: 11-05-2007 02:46 AM	Helpful 3SGTE swap info If anyone is doing a 3sgte swap into a auto car, I found that the flywheel on a Lexus LS400 has the same 8 bolt pattern. I drilled my own holes in a auto flywheel from a 3SFE before I came upon the 1UZ flywheel. I think the 4age flywheel is also a 8 Bolt pattern, but not sure. Also if anyone is needing to make a wiring harness because they were scamed into buying a 3SGTE without the front clip (as my friend was by Nippon Motors). What I did was to use the two plugs to the ECU from the 3SFE that were the same and then I went to a salvage yard and bought two ECU plugs with about a foot of wires from a 90 Toyota Camry. I cut the two plugs carefully with a Dremel cutting wheel and glued them together with epoxy. I still ended up needing the AFM, Injector resistor, boost pressure sensor, and who knows what else since I'm waiting on a AFM and Boost sensor to make it run. I also noticed that the ignitor from the 3SFE has the same part number as a Lexus LS400 and the 3SGTE.